Cisco Syslog样本

连线北海
连线北海
连线北海
201
文章
6
评论
2017年12月5日20:14:20 评论 917 3368字阅读11分13秒
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
*Jan 31 07:23:04: %PFREDUN-SPSTBY-6-ACTIVE: Initializing as ACTIVE processor for this switch
*Jan 31 07:23:04: %FABRIC-SPSTBY-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
*Jan 31 07:23:05: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 110.79.82.213 Port 514 started - CLI initiated
*Jan 31 07:23:05: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 111.186.35.237 Port 514 started - CLI initiated
*Jan 31 07:23:04: %SYS-SPSTBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Jan 31 07:23:05: %OIR-SP-3-PWRCYCLE: Card in module 6, is being power-cycled 'Switchover'
*Jan 31 07:23:07: %COMMON_FIB-4-FIBNULLIDB: Missing idb for fibidb Port-channel1A (if_number 109). : ios-base : (PID=16406, TID=3) : -Traceback=(s72033_rp-adventerprise_wan-6-dso-b.so+0x21044C) ([28:-9]4+0x3240C8) ([28:-9]12+0x31FBB4) ([39:0]+0x31FB8C)
*Jan 31 07:23:10: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Jan 31 07:23:11: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
*Jan 31 07:23:12: %MFIB_CONST_RP-6-REPLICATION_MODE_CHANGE: Replication Mode Change Detected. Current system replication mode is Ingress
*Jan 31 07:23:11: %OIR-SP-6-INSCARD: Card inserted in slot 5, interfaces are now online
*Jan 31 07:23:12: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now online
*Jan 31 07:23:12: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are now online
*Jan 31 07:23:12: %OIR-SP-6-INSCARD: Card inserted in slot 7, interfaces are now online
*Jan 31 07:23:13: %OIR-SP-6-INSCARD: Card inserted in slot 3, interfaces are now online
*Jan 31 07:23:21: %BGP-5-ADJCHANGE: neighbor 110.79.134.232 Up
*Jan 31 07:23:23: %TRACKING-5-STATE: 10 ip sla 10 state Down->Up
*Jan 31 07:23:24: %PARSER-5-CFGLOG_LOGGEDCMD: User:cds-eem  logged command:interface Vlan951
*Jan 31 07:23:25: %PARSER-5-CFGLOG_LOGGEDCMD: User:cds-eem  logged command:no shutdown
*Jan 31 07:23:25: %PARSER-5-CFGLOG_LOGGEDCMD: User:cds-eem  logged command:exit
*Jan 31 07:23:26: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.232 on Vlan133 from LOADING to FULL, Loading Done
*Jan 31 07:23:26: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.93.245 on Vlan143 from LOADING to FULL, Loading Done
*Jan 31 07:23:27: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.232 on Vlan141 from LOADING to FULL, Loading Done
*Jan 31 07:23:27: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.93.245 on Vlan500 from LOADING to FULL, Loading Done
*Jan 31 07:23:27: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.135.33 on Vlan166 from LOADING to FULL, Loading Done
*Jan 31 07:23:27: %OSPF-5-ADJCHG: Process 100, Nbr 221.181.70.190 on Vlan135 from LOADING to FULL, Loading Done
*Jan 31 07:23:30: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.242 on GigabitEthernet1/5 from LOADING to FULL, Loading Done
*Jan 31 07:23:30: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.243 on GigabitEthernet7/5 from LOADING to FULL, Loading Done
*Jan 31 07:23:30: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.244 on GigabitEthernet7/6 from LOADING to FULL, Loading Done
*Jan 31 07:23:32: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.242 on GigabitEthernet7/4 from LOADING to FULL, Loading Done
*Jan 31 07:23:32: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.242 on GigabitEthernet1/4 from LOADING to FULL, Loading Done
*Jan 31 07:23:33: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.244 on GigabitEthernet1/6 from LOADING to FULL, Loading Done
*Jan 31 07:23:34: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 110.79.82.213 Port 514 started - reconnection
*Jan 31 07:23:35: %BGP-5-ADJCHANGE: neighbor 110.79.134.224 Up
*Jan 31 07:23:35: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.242 on GigabitEthernet7/11 from LOADING to FULL, Loading Done
*Jan 31 07:23:39: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 111.186.35.237 Port 514 started - reconnection
*Jan 31 07:23:43: %TRACKING-5-STATE: 1 ip sla 1 reachability Down->Up
继续阅读
weinxin
微信公众号
分享IT信息技术、北海生活的网站。提供北海本地化的信息技术服务。
连线北海
  • 本文由 发表于 2017年12月5日20:14:20
  • 除非特殊声明,本站文章均为原创,转载请务必保留本文链接
关于EL表达式与thymeleaf 信息技术

关于EL表达式与thymeleaf

前言 很久之前,也许你在JSP代码中会遇到类似${person.name}、${person}这样的代码,这样的代码被称之为EL表达式,看起来像不像现在普遍使用的模板引擎thymeleaf里的用法? ...
Windows 10无法删除恢复分区 信息技术

Windows 10无法删除恢复分区

1  前言 Windows 10安装的时候,默认会创建一些类似【恢复】、【系统保留】分区,强迫症促使我想去删除它们,一般情况,通过【计算机管理】中的【磁盘管理】可以操作,但是你会发现根本没有删除选项,...
Tomcat增加管理账户 信息技术

Tomcat增加管理账户

默认情况下,Tomcat的管理功能是关闭的,如何开启? 使用文本编辑工具打开 ${TOMCAT_HOME}\conf\tomcat-users.xml 文件,在最下面可以看到Tomcat默认把用户以及...
匿名

发表评论

匿名网友 填写信息

:?: :razz: :sad: :evil: :!: :smile: :oops: :grin: :eek: :shock: :???: :cool: :lol: :mad: :twisted: :roll: :wink: :idea: :arrow: :neutral: :cry: :mrgreen: